|
 |
| Flange Kit: LBWK-88 (Large Black) |
|
|
|
Step 1
Remove the old unit from the cabinet by unscrewing it from the back of the cabinet. Using a saw, cut on the top of the cabinet, two lines (1" in length) that are parallel and 6" apart from the two sides of the cabinet. Then cut a straight line (20 1/8") that connects the ends of the two parallel lines.
| |  |
|
|
|
Step 2
Install the flanges by screwing them into the wood from the outside first, and then from the inside second.
|
|  |
|
|
|
Step 3
Install new cooling unit with screws (9 on top, 7 in the back). | |  |
|
|
