|
 |
| Flange Kit: KTWK-90-92 |
|
|
|
Step 1
Remove the old unit from the cabinet by unscrewing the screws located in the back and on the top of the cabinet. |
|
|
|
Step 2
Install the flanges included in the kit, by sliding the long end
in first. Screw the flanges into the wood from the outside first, and then from the inside.
|
|  |
|
|
|
Step 3
Using a saw, cut 1 7/8" down along both flanges
(from the unit end). Then connect the ends of the two cuts with a 20 1/8" cut.
|
|  |
|
|
|
Step 4
Install new cooling unit with screws (9 on top, 7 in the back). | |  |
|
|
